2008 Chrysler Sebring vs. 1992 Mercedes-Benz 500
To start off, 2008 Chrysler Sebring is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Mercedes-Benz 500. In addition, the cost of maintenance, including insurance, on 1992 Mercedes-Benz 500 would be higher. At 4,973 cc (8 cylinders), 1992 Mercedes-Benz 500 is equipped with a bigger engine. In terms of performance, 1992 Mercedes-Benz 500 (320 HP @ 5700 RPM) has 120 more horse power than 2008 Chrysler Sebring. (200 HP @ 5900 RPM) In normal driving conditions, 1992 Mercedes-Benz 500 should accelerate faster than 2008 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1992 Mercedes-Benz 500 weights approximately 505 kg more than 2008 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1992 Mercedes-Benz 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 Mercedes-Benz 500. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Mercedes-Benz 500 (470 Nm @ 3900 RPM) has 208 more torque (in Nm) than 2008 Chrysler Sebring. (262 Nm @ 4300 RPM). This means 1992 Mercedes-Benz 500 will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler Sebring. 2008 Chrysler Sebring has automatic transmission and 1992 Mercedes-Benz 500 has manual transmission. 1992 Mercedes-Benz 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler Sebring | 1992 Mercedes-Benz 500 | |
Make | Chrysler | Mercedes-Benz |
Model | Sebring | 500 |
Year Released | 2008 | 1992 |
Engine Position | Front | Front |
Engine Size | 2736 cc | 4973 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | V | V |
Horse Power | 200 HP | 320 HP |
Engine RPM | 5900 RPM | 5700 RPM |
Torque | 262 Nm | 470 Nm |
Torque RPM | 4300 RPM | 3900 RPM |
Engine Compression Ratio | 10.0:1 | 10.0:1 |
Top Speed | 216 km/hour | 245 km/hour |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1575 kg | 2080 kg |
Vehicle Length | 4850 mm | 5070 mm |
Vehicle Width | 1800 mm | 1920 mm |
Vehicle Height | 1400 mm | 1460 mm |
Wheelbase Size | 2750 mm | 2500 mm |
Fuel Tank Capacity | 61 L | 100 L |