2008 Chrysler Sebring vs. 1996 Mercedes-Benz S
To start off, 2008 Chrysler Sebring is newer by 12 year(s). Which means there will be less support and parts availability for 1996 Mercedes-Benz S. In addition, the cost of maintenance, including insurance, on 1996 Mercedes-Benz S would be higher. At 3,199 cc (6 cylinders), 1996 Mercedes-Benz S is equipped with a bigger engine. In terms of performance, 1996 Mercedes-Benz S (228 HP @ 5500 RPM) has 89 more horse power than 2008 Chrysler Sebring. (139 HP @ 5700 RPM) In normal driving conditions, 1996 Mercedes-Benz S should accelerate faster than 2008 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1996 Mercedes-Benz S weights approximately 296 kg more than 2008 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1996 Mercedes-Benz S is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Mercedes-Benz S. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Mercedes-Benz S (315 Nm @ 3750 RPM) has 127 more torque (in Nm) than 2008 Chrysler Sebring. (188 Nm @ 4350 RPM). This means 1996 Mercedes-Benz S will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler Sebring. 1996 Mercedes-Benz S has automatic transmission and 2008 Chrysler Sebring has manual transmission. 2008 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Mercedes-Benz S will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler Sebring | 1996 Mercedes-Benz S | |
Make | Chrysler | Mercedes-Benz |
Model | Sebring | S |
Year Released | 2008 | 1996 |
Body Type | Convertible | Sedan |
Engine Position | Front | Front |
Engine Size | 1995 cc | 3199 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 139 HP | 228 HP |
Engine RPM | 5700 RPM | 5500 RPM |
Torque | 188 Nm | 315 Nm |
Torque RPM | 4350 RPM | 3750 RPM |
Engine Bore Size | 87.5 mm | 89.9 mm |
Engine Stroke Size | 83 mm | 84 mm |
Engine Compression Ratio | 9.0:1 | 10.0:1 |
Fuel Type | Gasoline - Premium | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1600 kg | 1896 kg |
Vehicle Length | 4930 mm | 5120 mm |
Vehicle Width | 1800 mm | 1890 mm |
Vehicle Height | 1410 mm | 1490 mm |
Wheelbase Size | 2700 mm | 2520 mm |
Fuel Tank Capacity | 61 L | 70 L |