2008 Chrysler Sebring vs. 1997 Porsche Boxster

To start off, 2008 Chrysler Sebring is newer by 11 year(s). Which means there will be less support and parts availability for 1997 Porsche Boxster. In addition, the cost of maintenance, including insurance, on 1997 Porsche Boxster would be higher. At 2,480 cc (6 cylinders), 1997 Porsche Boxster is equipped with a bigger engine. In terms of performance, 1997 Porsche Boxster (201 HP @ 6000 RPM) has 63 more horse power than 2008 Chrysler Sebring. (138 HP @ 4000 RPM) In normal driving conditions, 1997 Porsche Boxster should accelerate faster than 2008 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 600 kg more than 1997 Porsche Boxster.

Because 1997 Porsche Boxster is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1997 Porsche Boxster. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (311 Nm @ 1800 RPM) has 66 more torque (in Nm) than 1997 Porsche Boxster. (245 Nm @ 4500 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1997 Porsche Boxster. 2008 Chrysler Sebring has automatic transmission and 1997 Porsche Boxster has manual transmission. 1997 Porsche Boxster will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler Sebring 1997 Porsche Boxster
Make Chrysler Porsche
Model Sebring Boxster
Year Released 2008 1997
Body Type Convertible Convertible
Engine Position Front Middle
Engine Size 1968 cc 2480 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line boxer
Valves per Cylinder 4 valves 4 valves
Horse Power 138 HP 201 HP
Engine RPM 4000 RPM 6000 RPM
Torque 311 Nm 245 Nm
Torque RPM 1800 RPM 4500 RPM
Engine Bore Size 81 mm 85.5 mm
Engine Stroke Size 95.5 mm 72 mm
Fuel Type Diesel Gasoline
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 4 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1850 kg 1250 kg
Vehicle Length 4940 mm 4320 mm
Vehicle Width 1850 mm 1780 mm
Vehicle Height 1490 mm 1300 mm
Wheelbase Size 2770 mm 2360 mm