2008 Chrysler Sebring vs. 2003 Holden Statesman
To start off, 2008 Chrysler Sebring is newer by 5 year(s). Which means there will be less support and parts availability for 2003 Holden Statesman. In addition, the cost of maintenance, including insurance, on 2003 Holden Statesman would be higher. At 3,791 cc (6 cylinders), 2003 Holden Statesman is equipped with a bigger engine. In terms of performance, 2003 Holden Statesman (204 HP @ 5200 RPM) has 65 more horse power than 2008 Chrysler Sebring. (139 HP @ 5700 RPM) In normal driving conditions, 2003 Holden Statesman should accelerate faster than 2008 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2003 Holden Statesman weights approximately 90 kg more than 2008 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2003 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Holden Statesman (305 Nm @ 3600 RPM) has 117 more torque (in Nm) than 2008 Chrysler Sebring. (188 Nm @ 4350 RPM). This means 2003 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler Sebring. 2003 Holden Statesman has automatic transmission and 2008 Chrysler Sebring has manual transmission. 2008 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler Sebring | 2003 Holden Statesman | |
Make | Chrysler | Holden |
Model | Sebring | Statesman |
Year Released | 2008 | 2003 |
Engine Position | Front | Front |
Engine Size | 1995 cc | 3791 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 139 HP | 204 HP |
Engine RPM | 5700 RPM | 5200 RPM |
Torque | 188 Nm | 305 Nm |
Torque RPM | 4350 RPM | 3600 RPM |
Fuel Type | Gasoline - Premium | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1600 kg | 1690 kg |
Vehicle Length | 4930 mm | 5200 mm |
Vehicle Width | 1800 mm | 1850 mm |
Vehicle Height | 1410 mm | 1450 mm |
Wheelbase Size | 2700 mm | 2950 mm |