2008 Chrysler Sebring vs. 2006 Fiat Siena

To start off, 2008 Chrysler Sebring is newer by 2 year(s). Which means there will be less support and parts availability for 2006 Fiat Siena. In addition, the cost of maintenance, including insurance, on 2006 Fiat Siena would be higher. At 2,360 cc (4 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (173 HP @ 6000 RPM) has 73 more horse power than 2006 Fiat Siena. (100 HP @ 5500 RPM). In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 2006 Fiat Siena. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 32 kg more than 2006 Fiat Siena. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (225 Nm @ 4400 RPM) has 151 more torque (in Nm) than 2006 Fiat Siena. (74 Nm @ 5500 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 2006 Fiat Siena. 2008 Chrysler Sebring has automatic transmission and 2006 Fiat Siena has manual transmission. 2006 Fiat Siena will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler Sebring 2006 Fiat Siena
Make Chrysler Fiat
Model Sebring Siena
Year Released 2008 2006
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 2360 cc 1581 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 173 HP 100 HP
Engine RPM 6000 RPM 5500 RPM
Torque 225 Nm 74 Nm
Torque RPM 4400 RPM 5500 RPM
Engine Compression Ratio 10.5:1 9.5:1
Drive Type Front Front
Transmission Type Automatic Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1815 kg 1783 kg
Vehicle Length 4930 mm 3830 mm
Vehicle Width 1820 mm 1640 mm
Vehicle Height 1490 mm 1440 mm
Wheelbase Size 2770 mm 2380 mm
Fuel Consumption Overall 10.2 L/100km 8 L/100km
Fuel Tank Capacity 64 L 54 L