2008 Chrysler Sebring vs. 2008 Mazda 3

To start off, both 2008 Chrysler Sebring and 2008 Mazda 3 were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,995 cc (4 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 420 kg more than 2008 Mazda 3.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (188 Nm @ 4350 RPM) has 42 more torque (in Nm) than 2008 Mazda 3. (146 Nm @ 4000 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.

Compare all specifications:

2008 Chrysler Sebring 2008 Mazda 3
Make Chrysler Mazda
Model Sebring 3
Year Released 2008 2008
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 1995 cc 1598 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 139 HP 0 HP
Torque 188 Nm 146 Nm
Torque RPM 4350 RPM 4000 RPM
Engine Bore Size 87.5 mm 78 mm
Engine Stroke Size 83 mm 83.6 mm
Engine Compression Ratio 9.0:1 10.0:1
Fuel Type Gasoline - Premium Gasoline
Top Speed 200 km/hour 183 km/hour
Acceleration 0-100mph 12.3 seconds 11.3 seconds
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1600 kg 1180 kg
Vehicle Length 4930 mm 4500 mm
Vehicle Height 1410 mm 1760 mm
Wheelbase Size 2700 mm 2650 mm
Fuel Consumption Overall 8.5 L/100km 8.9 L/100km
Fuel Tank Capacity 61 L 55 L