2008 Chrysler Sebring vs. 2013 Cadillac ATS

To start off, 2013 Cadillac ATS is newer by 5 year(s). Which means there will be less support and parts availability for 2008 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2008 Chrysler Sebring would be higher. At 3,600 cc (6 cylinders), 2013 Cadillac ATS is equipped with a bigger engine. In terms of performance, 2013 Cadillac ATS (317 HP @ 6800 RPM) has 178 more horse power than 2008 Chrysler Sebring. (139 HP @ 5700 RPM) In normal driving conditions, 2013 Cadillac ATS should accelerate faster than 2008 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 30 kg more than 2013 Cadillac ATS.

Because 2013 Cadillac ATS is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 Cadillac ATS. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Cadillac ATS (373 Nm @ 4800 RPM) has 185 more torque (in Nm) than 2008 Chrysler Sebring. (188 Nm @ 4350 RPM). This means 2013 Cadillac ATS will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler Sebring. 2013 Cadillac ATS has automatic transmission and 2008 Chrysler Sebring has manual transmission. 2008 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Cadillac ATS will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler Sebring 2013 Cadillac ATS
Make Chrysler Cadillac
Model Sebring ATS
Year Released 2008 2013
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 1995 cc 3600 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 139 HP 317 HP
Engine RPM 5700 RPM 6800 RPM
Torque 188 Nm 373 Nm
Torque RPM 4350 RPM 4800 RPM
Engine Bore Size 87.5 mm 94 mm
Engine Stroke Size 83 mm 86 mm
Engine Compression Ratio 9.0:1 11.5
Fuel Type Gasoline - Premium Flex Fuel
Acceleration 0-100mph 12.3 seconds 6 seconds
Drive Type Front Rear
Transmission Type Manual 6-speed automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1600 kg 1570 kg
Vehicle Length 4930 mm 4643 mm
Vehicle Width 1800 mm 1806 mm
Vehicle Height 1410 mm 1420 mm
Wheelbase Size 2700 mm 2776 mm
Fuel Tank Capacity 61 L 61 L