2008 Daihatsu Copen vs. 1978 Toyota Tercel
To start off, 2008 Daihatsu Copen is newer by 30 year(s). Which means there will be less support and parts availability for 1978 Toyota Tercel. In addition, the cost of maintenance, including insurance, on 1978 Toyota Tercel would be higher. At 1,452 cc (4 cylinders), 1978 Toyota Tercel is equipped with a bigger engine. In terms of performance, 2008 Daihatsu Copen (86 HP @ 6000 RPM) has 24 more horse power than 1978 Toyota Tercel. (62 HP @ 4800 RPM). In normal driving conditions, 2008 Daihatsu Copen should accelerate faster than 1978 Toyota Tercel. With that said, vehicle weight also plays an important factor in acceleration. 1978 Toyota Tercel weights approximately 18 kg more than 2008 Daihatsu Copen.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Daihatsu Copen (120 Nm @ 3200 RPM) has 18 more torque (in Nm) than 1978 Toyota Tercel. (102 Nm @ 2800 RPM). This means 2008 Daihatsu Copen will have an easier job in driving up hills or pulling heavy equipment than 1978 Toyota Tercel.
Compare all specifications:
2008 Daihatsu Copen | 1978 Toyota Tercel | |
Make | Daihatsu | Toyota |
Model | Copen | Tercel |
Year Released | 2008 | 1978 |
Engine Position | Front | Front |
Engine Size | 1298 cc | 1452 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 86 HP | 62 HP |
Engine RPM | 6000 RPM | 4800 RPM |
Torque | 120 Nm | 102 Nm |
Torque RPM | 3200 RPM | 2800 RPM |
Fuel Type | Gasoline - Premium | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Vehicle Weight | 852 kg | 870 kg |
Vehicle Length | 3400 mm | 3970 mm |
Vehicle Width | 1480 mm | 1560 mm |
Vehicle Height | 1250 mm | 1380 mm |
Wheelbase Size | 2230 mm | 2510 mm |