2008 Daihatsu Copen vs. 1986 Mercedes-Benz 420

To start off, 2008 Daihatsu Copen is newer by 22 year(s). Which means there will be less support and parts availability for 1986 Mercedes-Benz 420. In addition, the cost of maintenance, including insurance, on 1986 Mercedes-Benz 420 would be higher. At 4,196 cc (8 cylinders), 1986 Mercedes-Benz 420 is equipped with a bigger engine. In terms of performance, 1986 Mercedes-Benz 420 (231 HP @ 5400 RPM) has 145 more horse power than 2008 Daihatsu Copen. (86 HP @ 6000 RPM) In normal driving conditions, 1986 Mercedes-Benz 420 should accelerate faster than 2008 Daihatsu Copen. With that said, vehicle weight also plays an important factor in acceleration. 1986 Mercedes-Benz 420 weights approximately 775 kg more than 2008 Daihatsu Copen. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Daihatsu Copen is four wheel drive (4WD), it will have significant more traction and grip than 1986 Mercedes-Benz 420. In wet, icy, snow, or gravel driving conditions, 2008 Daihatsu Copen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Mercedes-Benz 420 (327 Nm @ 4000 RPM) has 206 more torque (in Nm) than 2008 Daihatsu Copen. (121 Nm @ 4400 RPM). This means 1986 Mercedes-Benz 420 will have an easier job in driving up hills or pulling heavy equipment than 2008 Daihatsu Copen. 1986 Mercedes-Benz 420 has automatic transmission and 2008 Daihatsu Copen has manual transmission. 2008 Daihatsu Copen will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1986 Mercedes-Benz 420 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Daihatsu Copen 1986 Mercedes-Benz 420
Make Daihatsu Mercedes-Benz
Model Copen 420
Year Released 2008 1986
Engine Position Front Front
Engine Size 1298 cc 4196 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Horse Power 86 HP 231 HP
Engine RPM 6000 RPM 5400 RPM
Torque 121 Nm 327 Nm
Torque RPM 4400 RPM 4000 RPM
Engine Bore Size 72 mm 92 mm
Engine Stroke Size 79.7 mm 78.9 mm
Drive Type 4WD Rear
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 850 kg 1625 kg
Vehicle Length 3400 mm 5170 mm
Vehicle Width 1480 mm 2010 mm
Vehicle Height 1250 mm 1450 mm
Wheelbase Size 2230 mm 3080 mm