2008 Daihatsu Copen vs. 2012 Mercedes-Benz CLS

To start off, 2012 Mercedes-Benz CLS is newer by 4 year(s). Which means there will be less support and parts availability for 2008 Daihatsu Copen. In addition, the cost of maintenance, including insurance, on 2008 Daihatsu Copen would be higher. At 4,663 cc (8 cylinders), 2012 Mercedes-Benz CLS is equipped with a bigger engine. In terms of performance, 2012 Mercedes-Benz CLS (402 HP @ 5000 RPM) has 316 more horse power than 2008 Daihatsu Copen. (86 HP @ 6000 RPM) In normal driving conditions, 2012 Mercedes-Benz CLS should accelerate faster than 2008 Daihatsu Copen. With that said, vehicle weight also plays an important factor in acceleration. 2012 Mercedes-Benz CLS weights approximately 1040 kg more than 2008 Daihatsu Copen. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Daihatsu Copen is four wheel drive (4WD), it will have significant more traction and grip than 2012 Mercedes-Benz CLS. In wet, icy, snow, or gravel driving conditions, 2008 Daihatsu Copen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Mercedes-Benz CLS (600 Nm @ 1800 RPM) has 479 more torque (in Nm) than 2008 Daihatsu Copen. (121 Nm @ 4400 RPM). This means 2012 Mercedes-Benz CLS will have an easier job in driving up hills or pulling heavy equipment than 2008 Daihatsu Copen. 2012 Mercedes-Benz CLS has automatic transmission and 2008 Daihatsu Copen has manual transmission. 2008 Daihatsu Copen will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Mercedes-Benz CLS will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Daihatsu Copen 2012 Mercedes-Benz CLS
Make Daihatsu Mercedes-Benz
Model Copen CLS
Year Released 2008 2012
Body Type Roadster Sedan
Engine Position Front Front
Engine Size 1298 cc 4663 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 86 HP 402 HP
Engine RPM 6000 RPM 5000 RPM
Torque 121 Nm 600 Nm
Torque RPM 4400 RPM 1800 RPM
Fuel Type Gasoline Gasoline
Acceleration 0-100mph 9.5 seconds 5.2 seconds
Drive Type 4WD Rear
Transmission Type Manual 7-speed shiftable automatic
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 850 kg 1890 kg
Vehicle Length 3400 mm 4940 mm
Vehicle Width 1480 mm 1882 mm
Vehicle Height 1250 mm 1417 mm
Wheelbase Size 2230 mm 2875 mm
Fuel Tank Capacity 40 L 80 L