2008 Dodge Viper vs. 1965 Ginetta G10
To start off, 2008 Dodge Viper is newer by 43 year(s). Which means there will be less support and parts availability for 1965 Ginetta G10. In addition, the cost of maintenance, including insurance, on 1965 Ginetta G10 would be higher. At 8,357 cc (10 cylinders), 2008 Dodge Viper is equipped with a bigger engine. In terms of performance, 2008 Dodge Viper (600 HP @ 6100 RPM) has 310 more horse power than 1965 Ginetta G10. (290 HP @ 5000 RPM). In normal driving conditions, 2008 Dodge Viper should accelerate faster than 1965 Ginetta G10. With that said, vehicle weight also plays an important factor in acceleration. 2008 Dodge Viper weights approximately 805 kg more than 1965 Ginetta G10. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 2008 Dodge Viper | 1965 Ginetta G10 | |
| Make | Dodge | Ginetta |
| Model | Viper | G10 |
| Year Released | 2008 | 1965 |
| Engine Position | Front | Middle |
| Engine Size | 8357 cc | 4726 cc |
| Engine Cylinders | 10 cylinders | 8 cylinders |
| Engine Type | V | V |
| Horse Power | 600 HP | 290 HP |
| Engine RPM | 6100 RPM | 5000 RPM |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1745 kg | 940 kg |
| Vehicle Length | 4470 mm | 3990 mm |
| Vehicle Width | 1920 mm | 1510 mm |
| Vehicle Height | 1240 mm | 1280 mm |
| Wheelbase Size | 2520 mm | 2290 mm |
| Fuel Tank Capacity | 61 L | 72 L |
