2008 Fiat Doblo vs. 1993 Nissan Pulsar
To start off, 2008 Fiat Doblo is newer by 15 year(s). Which means there will be less support and parts availability for 1993 Nissan Pulsar. In addition, the cost of maintenance, including insurance, on 1993 Nissan Pulsar would be higher. At 1,596 cc (4 cylinders), 1993 Nissan Pulsar is equipped with a bigger engine. In terms of performance, 1993 Nissan Pulsar (108 HP @ 6000 RPM) has 39 more horse power than 2008 Fiat Doblo. (69 HP @ 4000 RPM) In normal driving conditions, 1993 Nissan Pulsar should accelerate faster than 2008 Fiat Doblo. With that said, vehicle weight also plays an important factor in acceleration. 2008 Fiat Doblo weights approximately 305 kg more than 1993 Nissan Pulsar.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Fiat Doblo (180 Nm @ 1750 RPM) has 32 more torque (in Nm) than 1993 Nissan Pulsar. (148 Nm @ 4000 RPM). This means 2008 Fiat Doblo will have an easier job in driving up hills or pulling heavy equipment than 1993 Nissan Pulsar.
Compare all specifications:
2008 Fiat Doblo | 1993 Nissan Pulsar | |
Make | Fiat | Nissan |
Model | Doblo | Pulsar |
Year Released | 2008 | 1993 |
Body Type | Panel Van | Sedan |
Engine Position | Front | Front |
Engine Size | 1247 cc | 1596 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 69 HP | 108 HP |
Engine RPM | 4000 RPM | 6000 RPM |
Torque | 180 Nm | 148 Nm |
Torque RPM | 1750 RPM | 4000 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1385 kg | 1080 kg |
Vehicle Length | 4170 mm | 4240 mm |
Vehicle Width | 1720 mm | 1670 mm |
Vehicle Height | 1820 mm | 1400 mm |
Wheelbase Size | 2570 mm | 2440 mm |