2008 Fiat Grande Punto vs. 1946 Triumph 1800
To start off, 2008 Fiat Grande Punto is newer by 62 year(s). Which means there will be less support and parts availability for 1946 Triumph 1800. In addition, the cost of maintenance, including insurance, on 1946 Triumph 1800 would be higher. At 1,774 cc (4 cylinders), 1946 Triumph 1800 is equipped with a bigger engine. In terms of performance, both vehicles can yield 64 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1946 Triumph 1800 weights approximately 2 kg more than 2008 Fiat Grande Punto.
Because 1946 Triumph 1800 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1946 Triumph 1800. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Grande Punto, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 2008 Fiat Grande Punto | 1946 Triumph 1800 | |
| Make | Fiat | Triumph |
| Model | Grande Punto | 1800 |
| Year Released | 2008 | 1946 |
| Engine Position | Front | Front |
| Engine Size | 1241 cc | 1774 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 64 HP | 64 HP |
| Engine RPM | 5500 RPM | 4400 RPM |
| Engine Bore Size | 70.8 mm | 73 mm |
| Engine Stroke Size | 78.9 mm | 106 mm |
| Engine Compression Ratio | 11.0:1 | 6.7:1 |
| Top Speed | 155 km/hour | 129 km/hour |
| Drive Type | Front | Rear |
| Number of Seats | 5 seats | 2 seats |
| Number of Doors | 5 doors | 2 doors |
| Vehicle Weight | 1090 kg | 1092 kg |
| Vehicle Length | 3550 mm | 4290 mm |
| Vehicle Width | 1690 mm | 1660 mm |
| Wheelbase Size | 2520 mm | 2550 mm |
