2008 Fiat Palio vs. 2006 Isuzu I-280
To start off, 2008 Fiat Palio is newer by 2 year(s). Which means there will be less support and parts availability for 2006 Isuzu I-280. In addition, the cost of maintenance, including insurance, on 2006 Isuzu I-280 would be higher. At 2,801 cc, 2006 Isuzu I-280 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2006 Isuzu I-280 weights approximately 1015 kg more than 2008 Fiat Palio.
Because 2006 Isuzu I-280 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Isuzu I-280. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Palio, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Isuzu I-280 (251 Nm @ 2800 RPM) has 149 more torque (in Nm) than 2008 Fiat Palio. (102 Nm @ 3250 RPM). This means 2006 Isuzu I-280 will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Palio.
Compare all specifications:
2008 Fiat Palio | 2006 Isuzu I-280 | |
Make | Fiat | Isuzu |
Model | Palio | I-280 |
Year Released | 2008 | 2006 |
Engine Position | Front | Front |
Engine Size | 1242 cc | 2801 cc |
Horse Power | 0 HP | 175 HP |
Torque | 102 Nm | 251 Nm |
Torque RPM | 3250 RPM | 2800 RPM |
Engine Compression Ratio | 9.1:1 | 10.0:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 2 seats |
Number of Doors | 3 doors | 2 doors |
Vehicle Weight | 995 kg | 2010 kg |
Vehicle Length | 3830 mm | 5270 mm |
Vehicle Width | 1640 mm | 1720 mm |
Vehicle Height | 1440 mm | 1700 mm |
Wheelbase Size | 2380 mm | 3200 mm |
Fuel Consumption Overall | 7.8 L/100km | 10.2 L/100km |
Fuel Tank Capacity | 54 L | 74 L |