2008 Fiat Palio vs. 2011 Fiat Siena
To start off, 2011 Fiat Siena is newer by 3 year(s). Which means there will be less support and parts availability for 2008 Fiat Palio. In addition, the cost of maintenance, including insurance, on 2008 Fiat Palio would be higher. At 1,581 cc (4 cylinders), 2011 Fiat Siena is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2011 Fiat Siena weights approximately 79 kg more than 2008 Fiat Palio.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Fiat Palio (102 Nm @ 3250 RPM) has 28 more torque (in Nm) than 2011 Fiat Siena. (74 Nm @ 5500 RPM). This means 2008 Fiat Palio will have an easier job in driving up hills or pulling heavy equipment than 2011 Fiat Siena.
Compare all specifications:
2008 Fiat Palio | 2011 Fiat Siena | |
Make | Fiat | Fiat |
Model | Palio | Siena |
Year Released | 2008 | 2011 |
Engine Position | Front | Front |
Engine Size | 1242 cc | 1581 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 0 HP | 100 HP |
Torque | 102 Nm | 74 Nm |
Torque RPM | 3250 RPM | 5500 RPM |
Engine Compression Ratio | 9.1:1 | 9.5:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 159 km/hour | 184 km/hour |
Acceleration 0-100mph | 13.5 seconds | 11.5 seconds |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 3 doors | 4 doors |
Vehicle Weight | 995 kg | 1074 kg |
Vehicle Length | 3830 mm | 3550 mm |
Vehicle Width | 1640 mm | 1640 mm |
Vehicle Height | 1440 mm | 1440 mm |
Wheelbase Size | 2380 mm | 2380 mm |
Fuel Consumption Overall | 7.8 L/100km | 8.2 L/100km |
Fuel Tank Capacity | 54 L | 54 L |