2008 Fiat Panda vs. 2003 Ford Crown Victoria
To start off, 2008 Fiat Panda is newer by 5 year(s). Which means there will be less support and parts availability for 2003 Ford Crown Victoria. In addition, the cost of maintenance, including insurance, on 2003 Ford Crown Victoria would be higher. At 4,601 cc (8 cylinders), 2003 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2003 Ford Crown Victoria (221 HP @ 4800 RPM) has 152 more horse power than 2008 Fiat Panda. (69 HP @ 4000 RPM) In normal driving conditions, 2003 Ford Crown Victoria should accelerate faster than 2008 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2003 Ford Crown Victoria weights approximately 842 kg more than 2008 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2003 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2003 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Ford Crown Victoria (361 Nm) has 181 more torque (in Nm) than 2008 Fiat Panda. (180 Nm). This means 2003 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Panda. 2003 Ford Crown Victoria has automatic transmission and 2008 Fiat Panda has manual transmission. 2008 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Fiat Panda | 2003 Ford Crown Victoria | |
| Make | Fiat | Ford |
| Model | Panda | Crown Victoria |
| Year Released | 2008 | 2003 |
| Body Type | Hatchback | Sedan |
| Engine Position | Front | Front |
| Engine Size | 1248 cc | 4601 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 69 HP | 221 HP |
| Engine RPM | 4000 RPM | 4800 RPM |
| Torque | 180 Nm | 361 Nm |
| Engine Bore Size | 69.6 mm | 90.2 mm |
| Engine Stroke Size | 82 mm | 90 mm |
| Engine Compression Ratio | 18.0:1 | 9.4:1 |
| Fuel Type | Diesel | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 5 doors | 4 doors |
| Vehicle Weight | 935 kg | 1777 kg |
| Vehicle Length | 3540 mm | 5390 mm |
| Vehicle Width | 1600 mm | 1990 mm |
| Vehicle Height | 1550 mm | 1450 mm |
| Wheelbase Size | 2310 mm | 2620 mm |
| Fuel Consumption Overall | 4.3 L/100km | 11.8 L/100km |
| Fuel Tank Capacity | 35 L | 75 L |
