2008 Fiat Punto vs. 1990 Mercedes-Benz 300

To start off, 2008 Fiat Punto is newer by 18 year(s). Which means there will be less support and parts availability for 1990 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1990 Mercedes-Benz 300 would be higher. At 2,962 cc (6 cylinders), 1990 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1990 Mercedes-Benz 300 (188 HP @ 5700 RPM) has 89 more horse power than 2008 Fiat Punto. (99 HP @ 4000 RPM) In normal driving conditions, 1990 Mercedes-Benz 300 should accelerate faster than 2008 Fiat Punto. With that said, vehicle weight also plays an important factor in acceleration. 1990 Mercedes-Benz 300 weights approximately 370 kg more than 2008 Fiat Punto. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1990 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Punto, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 260 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles. 1990 Mercedes-Benz 300 has automatic transmission and 2008 Fiat Punto has manual transmission. 2008 Fiat Punto will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1990 Mercedes-Benz 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Fiat Punto 1990 Mercedes-Benz 300
Make Fiat Mercedes-Benz
Model Punto 300
Year Released 2008 1990
Engine Position Front Front
Engine Size 1910 cc 2962 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 99 HP 188 HP
Engine RPM 4000 RPM 5700 RPM
Torque 260 Nm 260 Nm
Torque RPM 1750 RPM 4800 RPM
Engine Compression Ratio 18.0:1 10.0:1
Top Speed 180 km/hour 211 km/hour
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 1150 kg 1520 kg
Vehicle Length 3850 mm 5030 mm
Vehicle Width 1670 mm 1830 mm
Vehicle Height 1490 mm 1440 mm
Wheelbase Size 2470 mm 2940 mm