2008 Fiat Punto vs. 2007 Mercury Milan

To start off, 2008 Fiat Punto is newer by 1 year(s). Which means there will be less support and parts availability for 2007 Mercury Milan. In addition, the cost of maintenance, including insurance, on 2007 Mercury Milan would be higher. At 2,967 cc (6 cylinders), 2007 Mercury Milan is equipped with a bigger engine. In terms of performance, 2007 Mercury Milan (221 HP @ 6250 RPM) has 122 more horse power than 2008 Fiat Punto. (99 HP @ 4000 RPM) In normal driving conditions, 2007 Mercury Milan should accelerate faster than 2008 Fiat Punto. With that said, vehicle weight also plays an important factor in acceleration. 2007 Mercury Milan weights approximately 682 kg more than 2008 Fiat Punto. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2007 Mercury Milan is four wheel drive (4WD), it will have significant more traction and grip than 2008 Fiat Punto. In wet, icy, snow, or gravel driving conditions, 2007 Mercury Milan will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Mercury Milan (278 Nm @ 4800 RPM) has 18 more torque (in Nm) than 2008 Fiat Punto. (260 Nm @ 1750 RPM). This means 2007 Mercury Milan will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Punto. 2007 Mercury Milan has automatic transmission and 2008 Fiat Punto has manual transmission. 2008 Fiat Punto will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Mercury Milan will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Fiat Punto 2007 Mercury Milan
Make Fiat Mercury
Model Punto Milan
Year Released 2008 2007
Body Type Hatchback Sedan
Engine Position Front Front
Engine Size 1910 cc 2967 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 99 HP 221 HP
Engine RPM 4000 RPM 6250 RPM
Torque 260 Nm 278 Nm
Torque RPM 1750 RPM 4800 RPM
Fuel Type Diesel Diesel
Drive Type Front 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 1150 kg 1832 kg
Vehicle Length 3850 mm 4870 mm
Vehicle Width 1670 mm 1840 mm
Vehicle Height 1490 mm 1460 mm
Wheelbase Size 2470 mm 2730 mm
Fuel Consumption Overall 5.3 L/100km 11.2 L/100km
Fuel Tank Capacity 49 L 66 L