2008 Fiat Siena vs. 1953 Rover P4

To start off, 2008 Fiat Siena is newer by 55 year(s). Which means there will be less support and parts availability for 1953 Rover P4. In addition, the cost of maintenance, including insurance, on 1953 Rover P4 would be higher. At 2,638 cc (6 cylinders), 1953 Rover P4 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1953 Rover P4 weights approximately 416 kg more than 2008 Fiat Siena.

Because 1953 Rover P4 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Rover P4. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Rover P4 (187 Nm @ 1750 RPM) has 85 more torque (in Nm) than 2008 Fiat Siena. (102 Nm @ 3250 RPM). This means 1953 Rover P4 will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Siena.

Compare all specifications:

2008 Fiat Siena 1953 Rover P4
Make Fiat Rover
Model Siena P4
Year Released 2008 1953
Engine Position Front Front
Engine Size 1242 cc 2638 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 0 HP 93 HP
Torque 102 Nm 187 Nm
Torque RPM 3250 RPM 1750 RPM
Engine Compression Ratio 9.1:1 7.5:1
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1070 kg 1486 kg
Vehicle Length 3830 mm 4540 mm
Vehicle Width 1640 mm 1670 mm
Vehicle Height 1440 mm 1630 mm
Wheelbase Size 2380 mm 2830 mm
Fuel Tank Capacity 54 L 52 L