2008 Fiat Siena vs. 1953 Studebaker Commander
To start off, 2008 Fiat Siena is newer by 55 year(s). Which means there will be less support and parts availability for 1953 Studebaker Commander. In addition, the cost of maintenance, including insurance, on 1953 Studebaker Commander would be higher. At 3,809 cc (8 cylinders), 1953 Studebaker Commander is equipped with a bigger engine. In terms of performance, 1953 Studebaker Commander (120 HP @ 4000 RPM) has 20 more horse power than 2008 Fiat Siena. (100 HP @ 5500 RPM) In normal driving conditions, 1953 Studebaker Commander should accelerate faster than 2008 Fiat Siena. With that said, vehicle weight also plays an important factor in acceleration. 1953 Studebaker Commander weights approximately 618 kg more than 2008 Fiat Siena. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1953 Studebaker Commander is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Studebaker Commander. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Studebaker Commander (258 Nm @ 2000 RPM) has 184 more torque (in Nm) than 2008 Fiat Siena. (74 Nm @ 5500 RPM). This means 1953 Studebaker Commander will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Siena. 1953 Studebaker Commander has automatic transmission and 2008 Fiat Siena has manual transmission. 2008 Fiat Siena will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1953 Studebaker Commander will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Fiat Siena | 1953 Studebaker Commander | |
| Make | Fiat | Studebaker |
| Model | Siena | Commander |
| Year Released | 2008 | 1953 |
| Body Type | Sedan | Coupe |
| Engine Position | Front | Front |
| Engine Size | 1581 cc | 3809 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Horse Power | 100 HP | 120 HP |
| Engine RPM | 5500 RPM | 4000 RPM |
| Torque | 74 Nm | 258 Nm |
| Torque RPM | 5500 RPM | 2000 RPM |
| Engine Compression Ratio | 9.5:1 | 7.0:1 |
| Top Speed | 184 km/hour | 145 km/hour |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1074 kg | 1692 kg |
| Vehicle Length | 3550 mm | 5140 mm |
| Vehicle Width | 1640 mm | 1810 mm |
| Vehicle Height | 1440 mm | 1440 mm |
| Wheelbase Size | 2380 mm | 3070 mm |
