2008 Fiat Siena vs. 1968 Mazda R-100
To start off, 2008 Fiat Siena is newer by 40 year(s). Which means there will be less support and parts availability for 1968 Mazda R-100. In addition, the cost of maintenance, including insurance, on 1968 Mazda R-100 would be higher. At 1,963 cc, 1968 Mazda R-100 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Fiat Siena weights approximately 265 kg more than 1968 Mazda R-100.
Because 1968 Mazda R-100 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Mazda R-100. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Mazda R-100 (135 Nm @ 4000 RPM) has 33 more torque (in Nm) than 2008 Fiat Siena. (102 Nm @ 3250 RPM). This means 1968 Mazda R-100 will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Siena.
Compare all specifications:
2008 Fiat Siena | 1968 Mazda R-100 | |
Make | Fiat | Mazda |
Model | Siena | R-100 |
Year Released | 2008 | 1968 |
Body Type | Sedan | Coupe |
Engine Position | Front | Front |
Engine Size | 1242 cc | 1963 cc |
Engine Type | in-line | dual-disk rotary |
Horse Power | 0 HP | 110 HP |
Torque | 102 Nm | 135 Nm |
Torque RPM | 3250 RPM | 4000 RPM |
Engine Compression Ratio | 9.1:1 | 9.4:1 |
Top Speed | 159 km/hour | 180 km/hour |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1070 kg | 805 kg |
Vehicle Length | 3830 mm | 3840 mm |
Vehicle Width | 1640 mm | 1490 mm |
Vehicle Height | 1440 mm | 1350 mm |
Wheelbase Size | 2380 mm | 2270 mm |