2008 Fiat Siena vs. 1976 Holden Statesman
To start off, 2008 Fiat Siena is newer by 32 year(s). Which means there will be less support and parts availability for 1976 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1976 Holden Statesman would be higher. At 5,042 cc (8 cylinders), 1976 Holden Statesman is equipped with a bigger engine. In terms of performance, 1976 Holden Statesman (213 HP @ 4800 RPM) has 107 more horse power than 2008 Fiat Siena. (106 HP @ 5500 RPM) In normal driving conditions, 1976 Holden Statesman should accelerate faster than 2008 Fiat Siena. With that said, vehicle weight also plays an important factor in acceleration. 1976 Holden Statesman weights approximately 450 kg more than 2008 Fiat Siena. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1976 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Holden Statesman (400 Nm @ 3100 RPM) has 260 more torque (in Nm) than 2008 Fiat Siena. (140 Nm @ 4000 RPM). This means 1976 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Siena. 1976 Holden Statesman has automatic transmission and 2008 Fiat Siena has manual transmission. 2008 Fiat Siena will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1976 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Fiat Siena | 1976 Holden Statesman | |
| Make | Fiat | Holden |
| Model | Siena | Statesman |
| Year Released | 2008 | 1976 |
| Engine Position | Front | Front |
| Engine Size | 1581 cc | 5042 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 106 HP | 213 HP |
| Engine RPM | 5500 RPM | 4800 RPM |
| Torque | 140 Nm | 400 Nm |
| Torque RPM | 4000 RPM | 3100 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1095 kg | 1545 kg |
| Vehicle Length | 3550 mm | 5190 mm |
| Vehicle Width | 1640 mm | 1890 mm |
| Vehicle Height | 1490 mm | 1400 mm |
| Wheelbase Size | 2370 mm | 2900 mm |
