2008 Fiat Siena vs. 2010 Smart ForTwo

To start off, 2010 Smart ForTwo is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Fiat Siena. In addition, the cost of maintenance, including insurance, on 2008 Fiat Siena would be higher. At 1,242 cc (4 cylinders), 2008 Fiat Siena is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Fiat Siena weights approximately 250 kg more than 2010 Smart ForTwo.

Because 2010 Smart ForTwo is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Smart ForTwo. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Fiat Siena (102 Nm @ 3250 RPM) has 10 more torque (in Nm) than 2010 Smart ForTwo. (92 Nm @ 4500 RPM). This means 2008 Fiat Siena will have an easier job in driving up hills or pulling heavy equipment than 2010 Smart ForTwo.

Compare all specifications:

2008 Fiat Siena 2010 Smart ForTwo
Make Fiat Smart
Model Siena ForTwo
Year Released 2008 2010
Body Type Sedan Coupe
Engine Position Front Rear
Engine Size 1242 cc 1000 cc
Engine Cylinders 4 cylinders 3 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 0 HP 70 HP
Torque 102 Nm 92 Nm
Torque RPM 3250 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1070 kg 820 kg
Vehicle Length 3830 mm 2695 mm
Vehicle Width 1640 mm 1560 mm
Vehicle Height 1440 mm 1542 mm
Wheelbase Size 2380 mm 1867 mm
Fuel Tank Capacity 54 L 33 L