2008 Ford Bantam vs. 1956 Mercedes-Benz Ponton
To start off, 2008 Ford Bantam is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Mercedes-Benz Ponton. In addition, the cost of maintenance, including insurance, on 1956 Mercedes-Benz Ponton would be higher. At 1,988 cc (4 cylinders), 1956 Mercedes-Benz Ponton is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1956 Mercedes-Benz Ponton weights approximately 190 kg more than 2008 Ford Bantam.
Because 1956 Mercedes-Benz Ponton is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Mercedes-Benz Ponton. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 110 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.
Compare all specifications:
| 2008 Ford Bantam | 1956 Mercedes-Benz Ponton | |
| Make | Ford | Mercedes-Benz |
| Model | Bantam | Ponton |
| Year Released | 2008 | 1956 |
| Engine Position | Front | Front |
| Engine Size | 1297 cc | 1988 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 0 HP | 47 HP |
| Torque | 110 Nm | 110 Nm |
| Torque RPM | 3000 RPM | 2000 RPM |
| Fuel Type | Gasoline | Diesel |
| Drive Type | Front | Rear |
| Number of Seats | 2 seats | 5 seats |
| Vehicle Weight | 1020 kg | 1210 kg |
| Vehicle Length | 4280 mm | 4490 mm |
| Vehicle Width | 1470 mm | 1750 mm |
| Vehicle Height | 1640 mm | 1570 mm |
| Wheelbase Size | 2670 mm | 2660 mm |
