2008 Ford Bantam vs. 1959 Ford Consul

To start off, 2008 Ford Bantam is newer by 49 year(s). Which means there will be less support and parts availability for 1959 Ford Consul. In addition, the cost of maintenance, including insurance, on 1959 Ford Consul would be higher. At 1,703 cc (4 cylinders), 1959 Ford Consul is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1959 Ford Consul weights approximately 60 kg more than 2008 Ford Bantam.

Because 1959 Ford Consul is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Ford Consul. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1959 Ford Consul (127 Nm @ 2300 RPM) has 17 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1959 Ford Consul will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.

Compare all specifications:

2008 Ford Bantam 1959 Ford Consul
Make Ford Ford
Model Bantam Consul
Year Released 2008 1959
Engine Position Front Front
Engine Size 1297 cc 1703 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 0 HP 51 HP
Torque 110 Nm 127 Nm
Torque RPM 3000 RPM 2300 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1020 kg 1080 kg
Vehicle Length 4280 mm 4380 mm
Vehicle Width 1470 mm 1750 mm
Vehicle Height 1640 mm 1540 mm
Wheelbase Size 2670 mm 2660 mm
Fuel Tank Capacity 54 L 47 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]