2008 Ford Bantam vs. 1959 Porsche 356
To start off, 2008 Ford Bantam is newer by 49 year(s). Which means there will be less support and parts availability for 1959 Porsche 356. In addition, the cost of maintenance, including insurance, on 1959 Porsche 356 would be higher. At 1,582 cc (4 cylinders), 1959 Porsche 356 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Ford Bantam weights approximately 182 kg more than 1959 Porsche 356.
Because 1959 Porsche 356 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Porsche 356. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1959 Porsche 356 (119 Nm @ 3700 RPM) has 9 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1959 Porsche 356 will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
2008 Ford Bantam | 1959 Porsche 356 | |
Make | Ford | Porsche |
Model | Bantam | 356 |
Year Released | 2008 | 1959 |
Engine Position | Front | Rear |
Engine Size | 1297 cc | 1582 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | boxer |
Horse Power | 0 HP | 75 HP |
Torque | 110 Nm | 119 Nm |
Torque RPM | 3000 RPM | 3700 RPM |
Engine Compression Ratio | 10.2:1 | 8.5:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 2 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1020 kg | 838 kg |
Vehicle Length | 4280 mm | 3960 mm |
Vehicle Width | 1470 mm | 1670 mm |
Vehicle Height | 1640 mm | 1310 mm |
Wheelbase Size | 2670 mm | 2110 mm |
Fuel Tank Capacity | 54 L | 52 L |