2008 Ford Bantam vs. 1967 MG MGC

To start off, 2008 Ford Bantam is newer by 41 year(s). Which means there will be less support and parts availability for 1967 MG MGC. In addition, the cost of maintenance, including insurance, on 1967 MG MGC would be higher. At 2,912 cc (6 cylinders), 1967 MG MGC is equipped with a bigger engine. In terms of performance, 1967 MG MGC (148 HP @ 5250 RPM) has 54 more horse power than 2008 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 1967 MG MGC should accelerate faster than 2008 Ford Bantam.

Because 1967 MG MGC is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 MG MGC. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 MG MGC (174 Nm @ 3500 RPM) has 39 more torque (in Nm) than 2008 Ford Bantam. (135 Nm @ 2500 RPM). This means 1967 MG MGC will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.

Compare all specifications:

2008 Ford Bantam 1967 MG MGC
Make Ford MG
Model Bantam MGC
Year Released 2008 1967
Body Type Pickup Convertible
Engine Position Front Front
Engine Size 1597 cc 2912 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 94 HP 148 HP
Engine RPM 5500 RPM 5250 RPM
Torque 135 Nm 174 Nm
Torque RPM 2500 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Length 5770 mm 4530 mm
Vehicle Height 1730 mm 1530 mm
Wheelbase Size 2670 mm 2560 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]