2008 Ford Bantam vs. 1969 Isuzu Bellett

To start off, 2008 Ford Bantam is newer by 39 year(s). Which means there will be less support and parts availability for 1969 Isuzu Bellett. In addition, the cost of maintenance, including insurance, on 1969 Isuzu Bellett would be higher. At 1,584 cc (4 cylinders), 1969 Isuzu Bellett is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Ford Bantam weights approximately 80 kg more than 1969 Isuzu Bellett.

Because 1969 Isuzu Bellett is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1969 Isuzu Bellett. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Isuzu Bellett (134 Nm @ 4200 RPM) has 24 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1969 Isuzu Bellett will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.

Compare all specifications:

2008 Ford Bantam 1969 Isuzu Bellett
Make Ford Isuzu
Model Bantam Bellett
Year Released 2008 1969
Engine Position Front Front
Engine Size 1297 cc 1584 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 0 HP 91 HP
Torque 110 Nm 134 Nm
Torque RPM 3000 RPM 4200 RPM
Engine Compression Ratio 10.2:1 8.7:1
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Number of Doors 2 doors 2 doors
Vehicle Weight 1020 kg 940 kg
Vehicle Length 4280 mm 4040 mm
Vehicle Width 1470 mm 1500 mm
Vehicle Height 1640 mm 1400 mm
Wheelbase Size 2670 mm 2360 mm
Fuel Tank Capacity 54 L 58 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]