2008 Ford Bantam vs. 1976 Lancia Gamma
To start off, 2008 Ford Bantam is newer by 32 year(s). Which means there will be less support and parts availability for 1976 Lancia Gamma. In addition, the cost of maintenance, including insurance, on 1976 Lancia Gamma would be higher. At 2,484 cc (4 cylinders), 1976 Lancia Gamma is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1976 Lancia Gamma weights approximately 378 kg more than 2008 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Lancia Gamma (206 Nm @ 3000 RPM) has 96 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1976 Lancia Gamma will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
2008 Ford Bantam | 1976 Lancia Gamma | |
Make | Ford | Lancia |
Model | Bantam | Gamma |
Year Released | 2008 | 1976 |
Engine Position | Front | Front |
Engine Size | 1297 cc | 2484 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | boxer |
Horse Power | 0 HP | 140 HP |
Torque | 110 Nm | 206 Nm |
Torque RPM | 3000 RPM | 3000 RPM |
Engine Bore Size | 74 mm | 102 mm |
Engine Stroke Size | 75.5 mm | 76 mm |
Engine Compression Ratio | 10.2:1 | 9.0:1 |
Top Speed | 158 km/hour | 192 km/hour |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 960 kg | 1338 kg |
Vehicle Length | 4280 mm | 4580 mm |
Vehicle Width | 1470 mm | 1730 mm |
Vehicle Height | 1640 mm | 1430 mm |
Wheelbase Size | 2670 mm | 2680 mm |
Fuel Tank Capacity | 54 L | 59 L |