2008 Ford Bantam vs. 1978 Reliant SE6

To start off, 2008 Ford Bantam is newer by 30 year(s). Which means there will be less support and parts availability for 1978 Reliant SE6. In addition, the cost of maintenance, including insurance, on 1978 Reliant SE6 would be higher. At 2,994 cc (6 cylinders), 1978 Reliant SE6 is equipped with a bigger engine. In terms of performance, 1978 Reliant SE6 (134 HP @ 5500 RPM) has 40 more horse power than 2008 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 1978 Reliant SE6 should accelerate faster than 2008 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1978 Reliant SE6 weights approximately 270 kg more than 2008 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1978 Reliant SE6 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1978 Reliant SE6. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 Reliant SE6 (233 Nm @ 3000 RPM) has 98 more torque (in Nm) than 2008 Ford Bantam. (135 Nm @ 2500 RPM). This means 1978 Reliant SE6 will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.

Compare all specifications: