2008 Ford Bantam vs. 1981 Nissan Laurel
To start off, 2008 Ford Bantam is newer by 27 year(s). Which means there will be less support and parts availability for 1981 Nissan Laurel. In addition, the cost of maintenance, including insurance, on 1981 Nissan Laurel would be higher. At 1,998 cc (6 cylinders), 1981 Nissan Laurel is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1981 Nissan Laurel weights approximately 168 kg more than 2008 Ford Bantam.
Because 1981 Nissan Laurel is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1981 Nissan Laurel. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1981 Nissan Laurel (135 Nm @ 3600 RPM) has 25 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1981 Nissan Laurel will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
2008 Ford Bantam | 1981 Nissan Laurel | |
Make | Ford | Nissan |
Model | Bantam | Laurel |
Year Released | 2008 | 1981 |
Body Type | Pickup | Sedan |
Engine Position | Front | Front |
Engine Size | 1297 cc | 1998 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 0 HP | 96 HP |
Torque | 110 Nm | 135 Nm |
Torque RPM | 3000 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 960 kg | 1128 kg |
Vehicle Length | 4280 mm | 4060 mm |
Vehicle Width | 1470 mm | 1630 mm |
Vehicle Height | 1640 mm | 1400 mm |
Wheelbase Size | 2670 mm | 2410 mm |