2008 Ford Bantam vs. 1987 Mazda 323

To start off, 2008 Ford Bantam is newer by 21 year(s). Which means there will be less support and parts availability for 1987 Mazda 323. In addition, the cost of maintenance, including insurance, on 1987 Mazda 323 would be higher. At 1,597 cc (4 cylinders), 2008 Ford Bantam is equipped with a bigger engine. In terms of performance, 2008 Ford Bantam (94 HP @ 5500 RPM) has 28 more horse power than 1987 Mazda 323. (66 HP @ 5800 RPM). In normal driving conditions, 2008 Ford Bantam should accelerate faster than 1987 Mazda 323. With that said, vehicle weight also plays an important factor in acceleration. 2008 Ford Bantam weights approximately 124 kg more than 1987 Mazda 323. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford Bantam (137 Nm @ 2500 RPM) has 36 more torque (in Nm) than 1987 Mazda 323. (101 Nm @ 3600 RPM). This means 2008 Ford Bantam will have an easier job in driving up hills or pulling heavy equipment than 1987 Mazda 323.

Compare all specifications:

2008 Ford Bantam 1987 Mazda 323
Make Ford Mazda
Model Bantam 323
Year Released 2008 1987
Engine Position Front Front
Engine Size 1597 cc 1324 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 94 HP 66 HP
Engine RPM 5500 RPM 5800 RPM
Torque 137 Nm 101 Nm
Torque RPM 2500 RPM 3600 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1000 kg 876 kg
Vehicle Length 5770 mm 4210 mm
Vehicle Height 1730 mm 1400 mm
Wheelbase Size 2670 mm 2410 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]