2008 Ford Bantam vs. 1992 Toyota Camry
To start off, 2008 Ford Bantam is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Toyota Camry. In addition, the cost of maintenance, including insurance, on 1992 Toyota Camry would be higher. At 2,165 cc (4 cylinders), 1992 Toyota Camry is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1992 Toyota Camry weights approximately 376 kg more than 2008 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Toyota Camry (147 Nm @ 4400 RPM) has 37 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1992 Toyota Camry will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
2008 Ford Bantam | 1992 Toyota Camry | |
Make | Ford | Toyota |
Model | Bantam | Camry |
Year Released | 2008 | 1992 |
Body Type | Pickup | Sedan |
Engine Position | Front | Front |
Engine Size | 1297 cc | 2165 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 0 HP | 126 HP |
Torque | 110 Nm | 147 Nm |
Torque RPM | 3000 RPM | 4400 RPM |
Engine Bore Size | 74 mm | 87.1 mm |
Engine Stroke Size | 75.5 mm | 90.9 mm |
Engine Compression Ratio | 10.2:1 | 9.5:1 |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 960 kg | 1336 kg |
Vehicle Length | 4280 mm | 4780 mm |
Vehicle Width | 1470 mm | 1780 mm |
Vehicle Height | 1640 mm | 1410 mm |
Wheelbase Size | 2670 mm | 2630 mm |
Fuel Tank Capacity | 54 L | 70 L |