2008 Ford Bantam vs. 1995 Rover 600
To start off, 2008 Ford Bantam is newer by 13 year(s). Which means there will be less support and parts availability for 1995 Rover 600. In addition, the cost of maintenance, including insurance, on 1995 Rover 600 would be higher. At 1,993 cc (4 cylinders), 1995 Rover 600 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1995 Rover 600 weights approximately 355 kg more than 2008 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Rover 600 (240 Nm @ 2100 RPM) has 130 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1995 Rover 600 will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
2008 Ford Bantam | 1995 Rover 600 | |
Make | Ford | Rover |
Model | Bantam | 600 |
Year Released | 2008 | 1995 |
Body Type | Pickup | Sedan |
Engine Position | Front | Front |
Engine Size | 1297 cc | 1993 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 0 HP | 197 HP |
Torque | 110 Nm | 240 Nm |
Torque RPM | 3000 RPM | 2100 RPM |
Engine Compression Ratio | 10.2:1 | 8.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1020 kg | 1375 kg |
Vehicle Length | 4280 mm | 4650 mm |
Vehicle Width | 1470 mm | 1720 mm |
Vehicle Height | 1640 mm | 1390 mm |
Wheelbase Size | 2670 mm | 2730 mm |