2008 Ford Bantam vs. 2002 Mercedes-Benz A
To start off, 2008 Ford Bantam is newer by 6 year(s). Which means there will be less support and parts availability for 2002 Mercedes-Benz A. In addition, the cost of maintenance, including insurance, on 2002 Mercedes-Benz A would be higher. At 2,084 cc (4 cylinders), 2002 Mercedes-Benz A is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2002 Mercedes-Benz A weights approximately 205 kg more than 2008 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Mercedes-Benz A (205 Nm @ 4000 RPM) has 95 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 2002 Mercedes-Benz A will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
| 2008 Ford Bantam | 2002 Mercedes-Benz A | |
| Make | Ford | Mercedes-Benz |
| Model | Bantam | A |
| Year Released | 2008 | 2002 |
| Body Type | Pickup | Hatchback |
| Engine Position | Front | Front |
| Engine Size | 1297 cc | 2084 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 0 HP | 138 HP |
| Torque | 110 Nm | 205 Nm |
| Torque RPM | 3000 RPM | 4000 RPM |
| Engine Compression Ratio | 10.2:1 | 11.0:1 |
| Top Speed | 158 km/hour | 198 km/hour |
| Acceleration 0-100mph | 12.9 seconds | 8.2 seconds |
| Drive Type | Front | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 960 kg | 1165 kg |
| Vehicle Length | 4280 mm | 3650 mm |
| Vehicle Width | 1470 mm | 1730 mm |
| Vehicle Height | 1640 mm | 1590 mm |
| Wheelbase Size | 2670 mm | 2430 mm |
| Fuel Tank Capacity | 54 L | 54 L |
