2008 Ford Bantam vs. 2005 Mercedes-Benz E
To start off, 2008 Ford Bantam is newer by 3 year(s). Which means there will be less support and parts availability for 2005 Mercedes-Benz E. In addition, the cost of maintenance, including insurance, on 2005 Mercedes-Benz E would be higher. At 3,199 cc (6 cylinders), 2005 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2005 Mercedes-Benz E (221 HP @ 5600 RPM) has 127 more horse power than 2008 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 2005 Mercedes-Benz E should accelerate faster than 2008 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2005 Mercedes-Benz E weights approximately 785 kg more than 2008 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2005 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2005 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Mercedes-Benz E (315 Nm @ 3000 RPM) has 178 more torque (in Nm) than 2008 Ford Bantam. (137 Nm @ 2500 RPM). This means 2005 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam. 2005 Mercedes-Benz E has automatic transmission and 2008 Ford Bantam has manual transmission. 2008 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Ford Bantam | 2005 Mercedes-Benz E | |
| Make | Ford | Mercedes-Benz |
| Model | Bantam | E |
| Year Released | 2008 | 2005 |
| Engine Position | Front | Front |
| Engine Size | 1597 cc | 3199 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 3 valves |
| Horse Power | 94 HP | 221 HP |
| Engine RPM | 5500 RPM | 5600 RPM |
| Torque | 137 Nm | 315 Nm |
| Torque RPM | 2500 RPM | 3000 RPM |
| Engine Bore Size | 82 mm | 89.9 mm |
| Engine Stroke Size | 75.5 mm | 84 mm |
| Engine Compression Ratio | 9.5:1 | 10.0:1 |
| Fuel Type | Gasoline | Gasoline - Premium |
| Top Speed | 176 km/hour | 233 km/hour |
| Acceleration 0-100mph | 11.5 seconds | 8.5 seconds |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1000 kg | 1785 kg |
| Vehicle Length | 5770 mm | 4860 mm |
| Vehicle Height | 1730 mm | 1500 mm |
| Wheelbase Size | 2670 mm | 2830 mm |
| Fuel Tank Capacity | 54 L | 80 L |
