2008 Ford Bantam vs. 2010 Fiat Siena

To start off, 2010 Fiat Siena is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2008 Ford Bantam would be higher. At 1,581 cc (4 cylinders), 2010 Fiat Siena is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2010 Fiat Siena weights approximately 114 kg more than 2008 Ford Bantam.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford Bantam (110 Nm @ 3000 RPM) has 36 more torque (in Nm) than 2010 Fiat Siena. (74 Nm @ 5500 RPM). This means 2008 Ford Bantam will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Siena.

Compare all specifications:

2008 Ford Bantam 2010 Fiat Siena
Make Ford Fiat
Model Bantam Siena
Year Released 2008 2010
Body Type Pickup Sedan
Engine Position Front Front
Engine Size 1297 cc 1581 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 0 HP 100 HP
Torque 110 Nm 74 Nm
Torque RPM 3000 RPM 5500 RPM
Engine Bore Size 74 mm 86.4 mm
Engine Stroke Size 75.5 mm 67.4 mm
Engine Compression Ratio 10.2:1 9.5:1
Fuel Type Gasoline Gasoline
Top Speed 158 km/hour 184 km/hour
Acceleration 0-100mph 12.9 seconds 11.5 seconds
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 960 kg 1074 kg
Vehicle Length 4280 mm 3550 mm
Vehicle Width 1470 mm 1640 mm
Vehicle Height 1640 mm 1440 mm
Wheelbase Size 2670 mm 2380 mm
Fuel Consumption Overall 8.8 L/100km 8.2 L/100km
Fuel Tank Capacity 54 L 54 L