2008 Ford Bantam vs. 2010 Mercedes-Benz CLC
To start off, 2010 Mercedes-Benz CLC is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2008 Ford Bantam would be higher. At 3,498 cc (6 cylinders), 2010 Mercedes-Benz CLC is equipped with a bigger engine. In terms of performance, 2010 Mercedes-Benz CLC (268 HP @ 6000 RPM) has 174 more horse power than 2008 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 2010 Mercedes-Benz CLC should accelerate faster than 2008 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mercedes-Benz CLC weights approximately 1850 kg more than 2008 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Mercedes-Benz CLC is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Mercedes-Benz CLC. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mercedes-Benz CLC (351 Nm @ 5000 RPM) has 216 more torque (in Nm) than 2008 Ford Bantam. (135 Nm @ 2500 RPM). This means 2010 Mercedes-Benz CLC will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam. 2010 Mercedes-Benz CLC has automatic transmission and 2008 Ford Bantam has manual transmission. 2008 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mercedes-Benz CLC will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Ford Bantam | 2010 Mercedes-Benz CLC | |
Make | Ford | Mercedes-Benz |
Model | Bantam | CLC |
Year Released | 2008 | 2010 |
Body Type | Pickup | Sedan |
Engine Position | Front | Front |
Engine Size | 1597 cc | 3498 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 94 HP | 268 HP |
Engine RPM | 5500 RPM | 6000 RPM |
Torque | 135 Nm | 351 Nm |
Torque RPM | 2500 RPM | 5000 RPM |
Fuel Type | Gasoline | Gasoline |
Top Speed | 171 km/hour | 250 km/hour |
Acceleration 0-100mph | 11.2 seconds | 6.3 seconds |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 980 kg | 2830 kg |
Vehicle Length | 5770 mm | 4460 mm |
Vehicle Height | 1730 mm | 1420 mm |
Wheelbase Size | 2670 mm | 2720 mm |
Fuel Consumption Overall | 9.4 L/100km | 6.6 L/100km |
Fuel Tank Capacity | 54 L | 62 L |