2008 Ford Bantam vs. 2011 Mercury Grand Marquis
To start off, 2011 Mercury Grand Marquis is newer by 3 year(s). Which means there will be less support and parts availability for 2008 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2008 Ford Bantam would be higher. At 4,600 cc (8 cylinders), 2011 Mercury Grand Marquis is equipped with a bigger engine. In terms of performance, 2011 Mercury Grand Marquis (224 HP @ 4800 RPM) has 130 more horse power than 2008 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 2011 Mercury Grand Marquis should accelerate faster than 2008 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2011 Mercury Grand Marquis weights approximately 887 kg more than 2008 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2011 Mercury Grand Marquis is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2011 Mercury Grand Marquis. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Mercury Grand Marquis (372 Nm @ 4000 RPM) has 237 more torque (in Nm) than 2008 Ford Bantam. (135 Nm @ 2500 RPM). This means 2011 Mercury Grand Marquis will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam. 2011 Mercury Grand Marquis has automatic transmission and 2008 Ford Bantam has manual transmission. 2008 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Mercury Grand Marquis will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Ford Bantam | 2011 Mercury Grand Marquis | |
| Make | Ford | Mercury |
| Model | Bantam | Grand Marquis |
| Year Released | 2008 | 2011 |
| Body Type | Pickup | Sedan |
| Engine Position | Front | Front |
| Engine Size | 1597 cc | 4600 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 94 HP | 224 HP |
| Engine RPM | 5500 RPM | 4800 RPM |
| Torque | 135 Nm | 372 Nm |
| Torque RPM | 2500 RPM | 4000 RPM |
| Fuel Type | Gasoline | Flex Fuel |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 980 kg | 1867 kg |
| Vehicle Length | 5770 mm | 5385 mm |
| Vehicle Height | 1730 mm | 1430 mm |
| Wheelbase Size | 2670 mm | 2911 mm |
| Fuel Tank Capacity | 54 L | 72 L |
