2008 Ford E-150 vs. 1969 Lancia Fulvia

To start off, 2008 Ford E-150 is newer by 39 year(s). Which means there will be less support and parts availability for 1969 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1969 Lancia Fulvia would be higher. At 4,606 cc (8 cylinders), 2008 Ford E-150 is equipped with a bigger engine. In terms of performance, 2008 Ford E-150 (225 HP @ 4800 RPM) has 113 more horse power than 1969 Lancia Fulvia. (112 HP @ 6000 RPM). In normal driving conditions, 2008 Ford E-150 should accelerate faster than 1969 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 2008 Ford E-150 weights approximately 77 kg more than 1969 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Ford E-150 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Ford E-150. However, in wet, icy, snow, or gravel driving conditions, 1969 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford E-150 (388 Nm @ 3500 RPM) has 235 more torque (in Nm) than 1969 Lancia Fulvia. (153 Nm @ 4500 RPM). This means 2008 Ford E-150 will have an easier job in driving up hills or pulling heavy equipment than 1969 Lancia Fulvia. 2008 Ford E-150 has automatic transmission and 1969 Lancia Fulvia has manual transmission. 1969 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Ford E-150 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Ford E-150 1969 Lancia Fulvia
Make Ford Lancia
Model E-150 Fulvia
Year Released 2008 1969
Body Type Van Coupe
Engine Position Front Front
Engine Size 4606 cc 1584 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 225 HP 112 HP
Engine RPM 4800 RPM 6000 RPM
Torque 388 Nm 153 Nm
Torque RPM 3500 RPM 4500 RPM
Engine Compression Ratio 9.3:1 10.5:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 2 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1077 kg 1000 kg
Vehicle Length 6030 mm 3990 mm
Vehicle Width 2020 mm 1570 mm
Vehicle Height 2120 mm 1330 mm
Wheelbase Size 3510 mm 2340 mm
Fuel Consumption Overall 14.7 L/100km 10.3 L/100km
Fuel Tank Capacity 132 L 38 L