2008 Ford Ranger vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Ford Ranger. In addition, the cost of maintenance, including insurance, on 2008 Ford Ranger would be higher. At 2,970 cc (6 cylinders), 2008 Ford Ranger is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (173 HP @ 6000 RPM) has 25 more horse power than 2008 Ford Ranger. (148 HP @ 4900 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 2008 Ford Ranger. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 766 kg more than 2008 Ford Ranger. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Ford Ranger is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Ford Ranger. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford Ranger (245 Nm @ 3950 RPM) has 20 more torque (in Nm) than 2010 Chrysler Sebring. (225 Nm @ 4400 RPM). This means 2008 Ford Ranger will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2010 Chrysler Sebring has automatic transmission and 2008 Ford Ranger has manual transmission. 2008 Ford Ranger will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Ford Ranger | 2010 Chrysler Sebring | |
Make | Ford | Chrysler |
Model | Ranger | Sebring |
Year Released | 2008 | 2010 |
Body Type | Pickup | Sedan |
Engine Position | Front | Front |
Engine Size | 2970 cc | 2358 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 148 HP | 173 HP |
Engine RPM | 4900 RPM | 6000 RPM |
Torque | 245 Nm | 225 Nm |
Torque RPM | 3950 RPM | 4400 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 3 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1107 kg | 1873 kg |
Vehicle Length | 4790 mm | 4850 mm |
Vehicle Width | 1770 mm | 1810 mm |
Vehicle Height | 1690 mm | 1510 mm |
Wheelbase Size | 2840 mm | 2770 mm |
Fuel Consumption Highway | 10.7 L/100km | 7.8 L/100km |
Fuel Consumption City | 14.7 L/100km | 11.2 L/100km |
Fuel Consumption Overall | 6.1 L/100km | 9.8 L/100km |
Fuel Tank Capacity | 64 L | 64 L |