2008 Ford Taurus vs. 1958 Lancia Appia
To start off, 2008 Ford Taurus is newer by 50 year(s). Which means there will be less support and parts availability for 1958 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1958 Lancia Appia would be higher. At 3,494 cc (6 cylinders), 2008 Ford Taurus is equipped with a bigger engine. In terms of performance, 2008 Ford Taurus (263 HP @ 6251 RPM) has 220 more horse power than 1958 Lancia Appia. (43 HP @ 4800 RPM). In normal driving conditions, 2008 Ford Taurus should accelerate faster than 1958 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2008 Ford Taurus weights approximately 243 kg more than 1958 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Ford Taurus is four wheel drive (4WD), it will have significant more traction and grip than 1958 Lancia Appia. In wet, icy, snow, or gravel driving conditions, 2008 Ford Taurus will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford Taurus (338 Nm @ 4501 RPM) has 261 more torque (in Nm) than 1958 Lancia Appia. (77 Nm @ 3000 RPM). This means 2008 Ford Taurus will have an easier job in driving up hills or pulling heavy equipment than 1958 Lancia Appia. 2008 Ford Taurus has automatic transmission and 1958 Lancia Appia has manual transmission. 1958 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Ford Taurus will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Ford Taurus | 1958 Lancia Appia | |
Make | Ford | Lancia |
Model | Taurus | Appia |
Year Released | 2008 | 1958 |
Engine Position | Front | Front |
Engine Size | 3494 cc | 1090 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 263 HP | 43 HP |
Engine RPM | 6251 RPM | 4800 RPM |
Torque | 338 Nm | 77 Nm |
Torque RPM | 4501 RPM | 3000 RPM |
Drive Type | 4WD | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1107 kg | 864 kg |
Vehicle Length | 5130 mm | 3980 mm |
Vehicle Width | 1900 mm | 1430 mm |
Vehicle Height | 1570 mm | 1410 mm |
Wheelbase Size | 2870 mm | 2520 mm |