2008 GMC Acadia vs. 1992 Nissan Laurel

To start off, 2008 GMC Acadia is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Nissan Laurel. In addition, the cost of maintenance, including insurance, on 1992 Nissan Laurel would be higher. At 3,600 cc (6 cylinders), 2008 GMC Acadia is equipped with a bigger engine. In terms of performance, 2008 GMC Acadia (275 HP @ 6600 RPM) has 185 more horse power than 1992 Nissan Laurel. (90 HP @ 5200 RPM). In normal driving conditions, 2008 GMC Acadia should accelerate faster than 1992 Nissan Laurel. With that said, vehicle weight also plays an important factor in acceleration. 2008 GMC Acadia weights approximately 971 kg more than 1992 Nissan Laurel. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1992 Nissan Laurel is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 Nissan Laurel. However, in wet, icy, snow, or gravel driving conditions, 2008 GMC Acadia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 GMC Acadia (340 Nm @ 3200 RPM) has 198 more torque (in Nm) than 1992 Nissan Laurel. (142 Nm @ 3200 RPM). This means 2008 GMC Acadia will have an easier job in driving up hills or pulling heavy equipment than 1992 Nissan Laurel. 2008 GMC Acadia has automatic transmission and 1992 Nissan Laurel has manual transmission. 1992 Nissan Laurel will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 GMC Acadia will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 GMC Acadia 1992 Nissan Laurel
Make GMC Nissan
Model Acadia Laurel
Year Released 2008 1992
Body Type SUV Sedan
Engine Position Front Front
Engine Size 3600 cc 1808 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 275 HP 90 HP
Engine RPM 6600 RPM 5200 RPM
Torque 340 Nm 142 Nm
Torque RPM 3200 RPM 3200 RPM
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 7 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 2141 kg 1170 kg
Vehicle Length 5100 mm 4700 mm
Vehicle Width 1990 mm 1700 mm
Vehicle Height 1780 mm 1370 mm
Wheelbase Size 3030 mm 2680 mm