2008 GMC Acadia vs. 2010 GMC Canyon

To start off, 2010 GMC Canyon is newer by 2 year(s). Which means there will be less support and parts availability for 2008 GMC Acadia. In addition, the cost of maintenance, including insurance, on 2008 GMC Acadia would be higher. At 3,600 cc (6 cylinders), 2008 GMC Acadia is equipped with a bigger engine. In terms of performance, 2008 GMC Acadia (275 HP @ 6600 RPM) has 89 more horse power than 2010 GMC Canyon. (186 HP @ 5600 RPM). In normal driving conditions, 2008 GMC Acadia should accelerate faster than 2010 GMC Canyon. With that said, vehicle weight also plays an important factor in acceleration. 2008 GMC Acadia weights approximately 412 kg more than 2010 GMC Canyon. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 GMC Acadia (340 Nm @ 3200 RPM) has 82 more torque (in Nm) than 2010 GMC Canyon. (258 Nm @ 2800 RPM). This means 2008 GMC Acadia will have an easier job in driving up hills or pulling heavy equipment than 2010 GMC Canyon. 2008 GMC Acadia has automatic transmission and 2010 GMC Canyon has manual transmission. 2010 GMC Canyon will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 GMC Acadia will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 GMC Acadia 2010 GMC Canyon
Make GMC GMC
Model Acadia Canyon
Year Released 2008 2010
Body Type SUV Pickup
Engine Position Front Front
Engine Size 3600 cc 2901 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 275 HP 186 HP
Engine RPM 6600 RPM 5600 RPM
Torque 340 Nm 258 Nm
Torque RPM 3200 RPM 2800 RPM
Engine Compression Ratio 10.2:1 10.8:1
Drive Type 4WD 4WD
Transmission Type Automatic Manual
Number of Seats 7 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 2142 kg 1730 kg
Vehicle Length 5100 mm 5270 mm
Vehicle Width 1990 mm 1750 mm
Vehicle Height 1780 mm 1720 mm
Wheelbase Size 3030 mm 3210 mm
Fuel Consumption Highway 10.7 L/100km 9.8 L/100km
Fuel Consumption City 14.7 L/100km 13.1 L/100km
Fuel Consumption Overall 13.1 L/100km 11.8 L/100km
Fuel Tank Capacity 83 L 72 L