2008 GMC Canyon vs. 1985 Skoda L

To start off, 2008 GMC Canyon is newer by 23 year(s). Which means there will be less support and parts availability for 1985 Skoda L. In addition, the cost of maintenance, including insurance, on 1985 Skoda L would be higher. At 2,901 cc (4 cylinders), 2008 GMC Canyon is equipped with a bigger engine. In terms of performance, 2008 GMC Canyon (185 HP @ 5600 RPM) has 128 more horse power than 1985 Skoda L. (57 HP @ 5200 RPM). In normal driving conditions, 2008 GMC Canyon should accelerate faster than 1985 Skoda L. With that said, vehicle weight also plays an important factor in acceleration. 2008 GMC Canyon weights approximately 1256 kg more than 1985 Skoda L. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 GMC Canyon is four wheel drive (4WD), it will have significant more traction and grip than 1985 Skoda L. In wet, icy, snow, or gravel driving conditions, 2008 GMC Canyon will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 GMC Canyon (259 Nm @ 2800 RPM) has 169 more torque (in Nm) than 1985 Skoda L. (90 Nm @ 3250 RPM). This means 2008 GMC Canyon will have an easier job in driving up hills or pulling heavy equipment than 1985 Skoda L.

Compare all specifications:

2008 GMC Canyon 1985 Skoda L
Make GMC Skoda
Model Canyon L
Year Released 2008 1985
Engine Position Front Rear
Engine Size 2901 cc 1219 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 185 HP 57 HP
Engine RPM 5600 RPM 5200 RPM
Torque 259 Nm 90 Nm
Torque RPM 2800 RPM 3250 RPM
Drive Type 4WD Rear
Transmission Type Manual Manual
Number of Seats 3 seats 4 seats
Vehicle Weight 2141 kg 885 kg
Vehicle Length 5270 mm 4170 mm
Vehicle Width 1750 mm 1600 mm
Vehicle Height 1720 mm 1410 mm
Wheelbase Size 3210 mm 2410 mm