2008 GMC Canyon vs. 1993 Mercedes-Benz 320

To start off, 2008 GMC Canyon is newer by 15 year(s). Which means there will be less support and parts availability for 1993 Mercedes-Benz 320. In addition, the cost of maintenance, including insurance, on 1993 Mercedes-Benz 320 would be higher. At 3,700 cc (5 cylinders), 2008 GMC Canyon is equipped with a bigger engine. In terms of performance, 2008 GMC Canyon (242 HP @ 5600 RPM) has 22 more horse power than 1993 Mercedes-Benz 320. (220 HP @ 5500 RPM). In normal driving conditions, 2008 GMC Canyon should accelerate faster than 1993 Mercedes-Benz 320. With that said, vehicle weight also plays an important factor in acceleration. 2008 GMC Canyon weights approximately 876 kg more than 1993 Mercedes-Benz 320. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 GMC Canyon is four wheel drive (4WD), it will have significant more traction and grip than 1993 Mercedes-Benz 320. In wet, icy, snow, or gravel driving conditions, 2008 GMC Canyon will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 GMC Canyon (328 Nm @ 4600 RPM) has 18 more torque (in Nm) than 1993 Mercedes-Benz 320. (310 Nm @ 3750 RPM). This means 2008 GMC Canyon will have an easier job in driving up hills or pulling heavy equipment than 1993 Mercedes-Benz 320. 2008 GMC Canyon has automatic transmission and 1993 Mercedes-Benz 320 has manual transmission. 1993 Mercedes-Benz 320 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 GMC Canyon will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 GMC Canyon 1993 Mercedes-Benz 320
Make GMC Mercedes-Benz
Model Canyon 320
Year Released 2008 1993
Engine Position Front Front
Engine Size 3700 cc 3199 cc
Engine Cylinders 5 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 242 HP 220 HP
Engine RPM 5600 RPM 5500 RPM
Torque 328 Nm 310 Nm
Torque RPM 4600 RPM 3750 RPM
Drive Type 4WD Rear
Transmission Type Automatic Manual
Number of Seats 6 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 2436 kg 1560 kg
Vehicle Length 5270 mm 4750 mm
Vehicle Width 1750 mm 1750 mm
Vehicle Height 1730 mm 1440 mm
Wheelbase Size 3210 mm 2810 mm
Fuel Tank Capacity 72 L 70 L