2008 GMC Sierra vs. 1966 Steyr 500

To start off, 2008 GMC Sierra is newer by 42 year(s). Which means there will be less support and parts availability for 1966 Steyr 500. In addition, the cost of maintenance, including insurance, on 1966 Steyr 500 would be higher. At 5,999 cc (8 cylinders), 2008 GMC Sierra is equipped with a bigger engine. In terms of performance, 2008 GMC Sierra (354 HP @ 5400 RPM) has 335 more horse power than 1966 Steyr 500. (19 HP @ 4600 RPM). In normal driving conditions, 2008 GMC Sierra should accelerate faster than 1966 Steyr 500. With that said, vehicle weight also plays an important factor in acceleration. 2008 GMC Sierra weights approximately 1661 kg more than 1966 Steyr 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1966 Steyr 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Steyr 500. However, in wet, icy, snow, or gravel driving conditions, 2008 GMC Sierra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 GMC Sierra (506 Nm @ 4400 RPM) has 474 more torque (in Nm) than 1966 Steyr 500. (32 Nm @ 2800 RPM). This means 2008 GMC Sierra will have an easier job in driving up hills or pulling heavy equipment than 1966 Steyr 500. 2008 GMC Sierra has automatic transmission and 1966 Steyr 500 has manual transmission. 1966 Steyr 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 GMC Sierra will be easier to drive especially in heavy traffic.

Compare all specifications: