2008 Hummer H3 vs. 1966 Steyr 650T
To start off, 2008 Hummer H3 is newer by 42 year(s). Which means there will be less support and parts availability for 1966 Steyr 650T. In addition, the cost of maintenance, including insurance, on 1966 Steyr 650T would be higher. At 3,653 cc (5 cylinders), 2008 Hummer H3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Hummer H3 weights approximately 1731 kg more than 1966 Steyr 650T.
Because 2008 Hummer H3 is four wheel drive (4WD), it will have significant more traction and grip than 1966 Steyr 650T. In wet, icy, snow, or gravel driving conditions, 2008 Hummer H3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Hummer H3 (328 Nm @ 4600 RPM) has 288 more torque (in Nm) than 1966 Steyr 650T. (40 Nm @ 2800 RPM). This means 2008 Hummer H3 will have an easier job in driving up hills or pulling heavy equipment than 1966 Steyr 650T. 2008 Hummer H3 has automatic transmission and 1966 Steyr 650T has manual transmission. 1966 Steyr 650T will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Hummer H3 will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Hummer H3 | 1966 Steyr 650T | |
Make | Hummer | Steyr |
Model | H3 | 650T |
Year Released | 2008 | 1966 |
Engine Size | 3653 cc | 641 cc |
Engine Cylinders | 5 cylinders | 2 cylinders |
Engine Type | in-line | in-line |
Horse Power | 0 HP | 20 HP |
Torque | 328 Nm | 40 Nm |
Torque RPM | 4600 RPM | 2800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 2231 kg | 500 kg |
Vehicle Length | 5180 mm | 2970 mm |
Vehicle Height | 2020 mm | 1380 mm |
Wheelbase Size | 2850 mm | 1850 mm |