2008 Hummer H3 vs. 1979 Chrysler Avenger
To start off, 2008 Hummer H3 is newer by 29 year(s). Which means there will be less support and parts availability for 1979 Chrysler Avenger. In addition, the cost of maintenance, including insurance, on 1979 Chrysler Avenger would be higher. At 3,653 cc (5 cylinders), 2008 Hummer H3 is equipped with a bigger engine. In terms of performance, 2008 Hummer H3 (242 HP @ 5600 RPM) has 183 more horse power than 1979 Chrysler Avenger. (59 HP @ 5000 RPM). In normal driving conditions, 2008 Hummer H3 should accelerate faster than 1979 Chrysler Avenger. With that said, vehicle weight also plays an important factor in acceleration. 2008 Hummer H3 weights approximately 1352 kg more than 1979 Chrysler Avenger. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Hummer H3 is four wheel drive (4WD), it will have significant more traction and grip than 1979 Chrysler Avenger. In wet, icy, snow, or gravel driving conditions, 2008 Hummer H3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Hummer H3 (328 Nm @ 4600 RPM) has 235 more torque (in Nm) than 1979 Chrysler Avenger. (93 Nm @ 2600 RPM). This means 2008 Hummer H3 will have an easier job in driving up hills or pulling heavy equipment than 1979 Chrysler Avenger. 1979 Chrysler Avenger has automatic transmission and 2008 Hummer H3 has manual transmission. 2008 Hummer H3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1979 Chrysler Avenger will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Hummer H3 | 1979 Chrysler Avenger | |
Make | Hummer | Chrysler |
Model | H3 | Avenger |
Year Released | 2008 | 1979 |
Engine Position | Front | Front |
Engine Size | 3653 cc | 1295 cc |
Engine Cylinders | 5 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 242 HP | 59 HP |
Engine RPM | 5600 RPM | 5000 RPM |
Torque | 328 Nm | 93 Nm |
Torque RPM | 4600 RPM | 2600 RPM |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 2232 kg | 880 kg |
Vehicle Length | 4750 mm | 4150 mm |
Vehicle Width | 1900 mm | 1620 mm |
Vehicle Height | 1860 mm | 1420 mm |
Wheelbase Size | 2850 mm | 2500 mm |