2008 Hummer H3 vs. 1980 ZIL 4104
To start off, 2008 Hummer H3 is newer by 28 year(s). Which means there will be less support and parts availability for 1980 ZIL 4104. In addition, the cost of maintenance, including insurance, on 1980 ZIL 4104 would be higher. At 7,695 cc (8 cylinders), 1980 ZIL 4104 is equipped with a bigger engine.
Because 2008 Hummer H3 is four wheel drive (4WD), it will have significant more traction and grip than 1980 ZIL 4104. In wet, icy, snow, or gravel driving conditions, 2008 Hummer H3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 ZIL 4104 (608 Nm @ 4000 RPM) has 280 more torque (in Nm) than 2008 Hummer H3. (328 Nm @ 4600 RPM). This means 1980 ZIL 4104 will have an easier job in driving up hills or pulling heavy equipment than 2008 Hummer H3. 1980 ZIL 4104 has automatic transmission and 2008 Hummer H3 has manual transmission. 2008 Hummer H3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 ZIL 4104 will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Hummer H3 | 1980 ZIL 4104 | |
Make | Hummer | ZIL |
Model | H3 | 4104 |
Year Released | 2008 | 1980 |
Engine Position | Front | Front |
Engine Size | 3652 cc | 7695 cc |
Engine Cylinders | 5 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 0 HP | 311 HP |
Torque | 328 Nm | 608 Nm |
Torque RPM | 4600 RPM | 4000 RPM |
Engine Bore Size | 95.5 mm | 108.1 mm |
Engine Stroke Size | 102 mm | 105 mm |
Engine Compression Ratio | 10.0:1 | 9.3:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 7 seats |
Vehicle Length | 5180 mm | 5750 mm |
Vehicle Width | 1900 mm | 2100 mm |
Vehicle Height | 1900 mm | 1510 mm |
Wheelbase Size | 2850 mm | 3340 mm |